IFD:Printing Acoustic Interfaces/acoustic sensing circuits: Difference between revisions

IFD:Printing Acoustic Interfaces/acoustic sensing circuits (view source)

1 byte removed , 27 June 2019

721

edits

@@ Line 5: / Line 5: @@
 ==Printed Capacitive (Condenser) Microphone==
 However, the circuits where still capable of sensing vibrations, because of another effect that was not anticipated, but stronger in the actual circuit: The '''capacitive effect''' of the two opposing coils. This capacitive effect can be made larger by providing a bigger overlapping area of the two conductors that form the microphonic surface. That simplified our print designs a little, because we were not forced to print coils as two port devices, but could use two rectangular shapes with a single port each. Leading to lesser connections and no jumper wires on our paper printed microphones.
-Our actual designs are sender-receiver type circuits, utilizing the radio frequency signal transmission as a means to get read of mains hum and other interferences. At the same time, this provides the flexibility to detect different frequencies with a single receiving circuit.
+Our actual designs are sender-receiver type circuits, utilizing the radio frequency signal transmission as a means to get rid of mains hum and other interferences. At the same time, this provides the flexibility to detect different frequencies with a single receiving circuit.
 [[File:microphone_amp_tl072_Steckplatine.png | thumb|left| TL072 Version ]]