|
|
| Line 48: |
Line 48: |
| ==Works== | | ==Works== |
| ====Cases for Microscope==== | | ====Cases for Microscope==== |
| | | * Adriana / [[Project Sketch]] |
| '''Adriana''' / [[Project Sketch]]
| | * [[/Jakob/]] |
| | | * Raphael [[Doku DIY Microscop]] |
| '''Approach by Jakob'''
| | * [[/Manuel/]] |
| | | * [[/Cathleen/]] |
| [[Image:Microscope-case-jakob-side-view.png|390px|thumb|right|Side view]] | |
| The basic idea of this concept is pretty simple: We are using two carriages (in German: Schlitten) which lie on one another where the contact surface is a plane in the angle of 15 degrees to the table. Pushing the lower carriage to the left will force the upper carriage to move upwards.
| |
| | |
| For moving the lower carriage a simple and therefore cheap screw with an M6 thread is needed. One rotation about its own axis will move the lower carriage about 1 mm and thus the upper carriage about 0.25 mm. For the guideway (in German: Führung) we should use steel bolts which aren't expensive as well. We should be able to print all the other components with the 3D printer.
| |
| | |
| If desired I can deliver more technical drawings with correct measurements but I guess this is not needed at the moment as we will re-design this approach anyway.
| |
| | |
| [[Image:Microscope-case-jakob-rendered.jpg|800px|thumb|left|Rendered image]]
| |
| | |
| '''Raphael [[Doku DIY Microscop]]'''
| |
| | |
| '''Manuel''' [[File:HW_DIYMIC_P_1.jpg|250px]] [[File:HW_DIYMIC_P_2.jpg|250px]]
| |
| | |
| The scale is 3:1 and on the first page you can see the microscope from the front. On the second page there is the view from above and an idea how I can put the big wheel into the box. In the scetch from above are just the details drawn which where important for me.
| |
| | |
| '''Cathleen'''
| |
| [[Image:MicroscopeCamera.jpg|390px|thumb|right|wedge approach Cathleen]]
| |
| Approach with 2 wedges. The aim was to find a simple mechanism that allows for high precision. If you tighten the screw the lower wedge moves left an pushes up the upper wedge with the camera on top of it. If you loosen the screw the camera moves down.
| |
| Because of its simplicity it would be less susceptible to errors.
| |
| | |
|
| |
| | |
| <!-- * Example (name, nickname or initials) [[/Projectname/]] -->
| |
|
| |
|
| ==Links== | | ==Links== |
