GMU:Tutorials/Performance Platform/Sound System Stereo: Difference between revisions

GMU:Tutorials/Performance Platform/Sound System Stereo (view source)

20 bytes added , 29 July 2016

154

edits

@@ Line 67: / Line 67: @@
 == Trouble shooting ==
-Situation 1: You already plug in sound cable but not sound?
+Situation 1: You've already plug in sound cable but not sound?
 Answer:
-* Check if you turn both power supplier for speaker system and sound workstation(Mac pro)on.
+* Check if you have turned both power supplier for speaker system and sound workstation(Mac pro)on.
-* Check if you already turn on the Fireface UFX and  Fireface 800.<br>
+* Check if you have already turned on the Fireface UFX and  Fireface 800.<br>
 Situation 2: All are truned on but still no sound?
 * Check the Mac Pro and go to RME setting application(within the deck)to see if the sound card is selected to "Fireface 800" correctly.
-* Open up the totalmix control panel, sending sound signal from your playback device, then check it if there has signal in the stereo channal(Default is 1/2).
+* Open up the totalmix control panel, sending sound signal from your playback device, then check it there has signal in the stereo channal(Default is 1/2).
-* Check if you already choose the "Master out" playing mode correctly, and of course, volume up until you could listen somthing.
+* Check if you have already chose the "Master out" as output mode correctly, and of course, volume up until you could listen somthing.