GMU:DIY Biolab “Driver’s License”/Christian Wiegert: Difference between revisions

GMU:DIY Biolab “Driver’s License”/Christian Wiegert (view source)

2 bytes removed , 6 March 2018

237

edits

@@ Line 37: / Line 37: @@
 === Day 0 ===
-I build and set up a box, seperated in 4 sections. Each section containing one 1 Watt LED to support the inhabitants with light. The boxes have fans, so the air inside will be interchanged from time to time. To control the amount and - for the first experiment -  the duration of the light and the fans i wrote a little script that is running on an arduino. this script also counts the time (and in case of a powerdrain stores this information on the eeprom).
+I build and set up a box, seperated in 4 sections. Each section containing one 1 Watt LED to support the inhabitants with light. The boxes have fans, so the air inside will be interchanged from time to time. To control the amount and - for the first experiment -  the duration of the light and the fans i wrote a little script that is running on an arduino. This script also counts the time (and in case of a powerdrain stores this information on the eeprom).
 For the first part I did not do controlled watering, i just gave them water by hand.
@@ Line 45: / Line 45: @@
 In the two left hand sections, the plants will have a 24h day, with 12h of light. In the other two boxes it will be 12h days with 6h light.
 I set up the box in my shared-working-room, which was probably not the best idea, as people there tend to be heating a lot, which results in very dry air.