IFD:PhysicalComp2011/Julia Putscher/Codes for Arduino and Processing

Arduino

int an1,an2 = 0;
int redLedPin =13;
boolean triggered = false;

void setup(){
Serial.begin(9600);
pinMode(redLedPin, OUTPUT); // set the red LED pin to be an output
// Serial.println("Starting");
}

void loop(){
// read analog value in
int an2 = analogRead(0);
Serial.print("Y");
Serial.println(an2,DEC); //threshold
int an1= analogRead(5);
Serial.print("X");
Serial.println(an1,DEC);

if(an1 > an2 && !triggered){
triggered = true;
digitalWrite(redLedPin, HIGH); // turn off the red LED
}
if(an1 <= an2 && triggered){
triggered = false;
digitalWrite(redLedPin, LOW); // turn off the red LED
}
}

Processing

import processing.serial.*;
String buff = "";
int val = 0;
int NEWLINE = 10;
int xPos,yPos,zPos = 0;
int displaySize = 2;
int an1, an2, an3; //an1 pot; an2 ir;
Serial port;

void setup(){
background(80);
size(800,600);
smooth();

port = new Serial(this,"COM4", 9600); //local USB- port
}

void draw(){
// new background over old
fill(80,5);
noStroke();
rect(0,0,width,height);
// wipe out a small area in front of the new data
fill(80);
rect(xPos+displaySize,0,50,height);
// check for serial, and process
while (port.available() > 0) {
serialEvent(port.read());
}
}

void serialEvent(int serial) {
print("A"); //header variable, so we know which sensor value is which
println(an1); //send as a ascii encoded number - we'll turn it back into a number at the other end
//Serial.print(10, BYTE); //terminating character
print("B"); //header variable, so we know which sensor value is which
println(an2); //send as a ascii encoded number - we'll turn it back into a number at the other end
//Serial.print(10, BYTE); //terminating character

if(serial != '\n') {
buff += char(serial);
}
else {
int curX = buff.indexOf("X");
int curY = buff.indexOf("Y");

if(curX >=0){
String val = buff.substring(curX+1);
an1 = Integer.parseInt(val.trim());
xPos++;

if(xPos > width) xPos = 0;
sensorTic1(xPos,an1);
}

if(curY >=0){
String val = buff.substring(curY+1);
an2 = Integer.parseInt(val.trim());
yPos++;

if(yPos > width) yPos = 0;
sensorTic2(yPos,an2);
}
// Clear the value of "buff"
buff = "";
}
}

void sensorTic1(int x, int y){
stroke(0,0,255);
fill(0,0,255);
ellipse(x,y,displaySize,displaySize);
}

void sensorTic2(int x, int y){
stroke(255,0,0);
fill(255,0,0);
ellipse(x,y,displaySize,displaySize);
}