GMU:DIY-Microscopy/Nils: Difference between revisions

From Medien Wiki
Line 39: Line 39:
[[File:Pondwater.jpg|250px|]]
[[File:Pondwater.jpg|250px|]]
[[File:Sawdust.jpg|250px|]]
[[File:Sawdust.jpg|250px|]]
 
[[File:window_cleaner_nils.jpg|250px|]]
[[File:feather_nils.jpg|250px|]]


== Captured footage ==
== Captured footage ==

Revision as of 15:05, 23 November 2012

Miroscopy stage construction

Technical drawing Nils 02.jpg

The aproach was to build a cylinder form for the microscope in order to pick up the shape of the petridish. two srews at each side of the cylinder are added to manually lift and lower the plate with the camera (which is insider of the cylinder).

3D Model

3D Model Mainnils.jpg 3D ModelPlatte nils.jpg

You can download the .stl files of the plate and the plain cylinder

Stage construction cardboard model

3D Printed Model

printed model with baseplate model without baseplate (flipped)


This Model was printed with a Rapman 3.1 within 4h 37min. i used sketchup to create the needed .stl file and then used netfabb to check it. Last step was to create a .bfb file (for Rapman) via Axon (Windows only) likewise you could use Skeinforge.

Specimen/Probes collected

RedBerries Nils.jpg Spiders.jpg Pondwater.jpg Sawdust.jpg Window cleaner nils.jpg Feather nils.jpg

Captured footage

Feather 01.jpg Feather 02.jpg Moss 01 nils.jpg Redberries 01 nils.jpg Redberries 02 nils.jpg Sawdust 01 nils.jpg Spider 01 nils.jpg Spider 02 nils.jpg Spider 03 nils.jpg Windowcleaner 01 nils.jpg Windowcleaner 02 nils.jpg