m (created this stub...) |
(No difference)
|
Revision as of 04:29, 29 October 2014
List of Sensors and Actors used on the Fingies Cards
feel free to structure, improve, add useful info on this page - I just created this page to prepare a workshop and buy the necessary components.
Shake: Accelerometer (MMA1251KEG) http://de.rs-online.com/web/p/beschleunigungssensoren-ics/7522311/
IR-Receiver: Detects the Infrared Signals from a TV Remote
RGB-LED: SMD LED 5050 RGB PLCC6 http://www.ebay.de/itm/50x-RGB-SMD-5050-LED-PLCC-6-3-Chip-/321560900744?pt=RC_Modellbau&hash=item4ade85f488 http://www.ebay.de/itm/10-20-50-100-500-1000-RGB-Leds-5050-SMD-Rot-Grun-Blau-LED-PLCC6-Strippe-Leiste-/130950644679?pt=Bauteile&var=&hash=item1e7d4443c7
Humidity: Printed Sensor, based on resistance of the base material when it becomes wet. Only a resistor needed for the measurement. around 50k to 100k worked well on thick paper in our design.
Bend Sensor (Watterott) http://www.watterott.com/de/Flex-Sensor-45
Pressure (readily made) http://www.watterott.com/de/Drucksensor-127mm
Pressure (printed) - same as Printed Humidity Sensor - responds to skin resistance on printed traces.
Button (mechanical)
Magnetic Fields: http://de.farnell.com/honeywell-s-c/ss39/sensor-hall-effekt-linear-sot23/dp/2292924
Temperature: http://de.farnell.com/microchip/mcp9700at-e-tt/thermal-sensor-2-3-5-5v-sot23-3/dp/1605577
Vibration Motor: Any cellphone's vibration motor can be used. I used the one from samsung gt8150 or Nokia 2630 as it has some cables attached, is sealed and comes with a sticky back that can be put on the printed circuits...
Flat Touch Potentiometer Ring (HotPot) http://www.watterott.com/de/HotPot-Rotary-Potentiometer
PIR-Sensor (Heat):
Piezo (Speaker) Conrad (or a little less shipping cost on digitalo.de): http://www.conrad.de/ce/de/product/710397/Piezokeramisches-Element-EPZ-Serie-4400-Hz-Inhalt-1-St http://www.digitalo.de/products/224569/Piezoelement-Epz-27ms44w.html
Piezo (Microphone):
Same as Speaker, but used as Microphone