Revision as of 12:24, 10 February 2016

Project 1

Improbable Switch

In this assignment I experimented with different possible switches. Initially I tested multiple conductive materials that would allow me to create an improbable switch. My first approach was a key that would trigger sound and light when inserted into a lock. After tests and fixes... It worked!!! :)

Later on I got curious about the possibility to created a device that could be placed in different locations, so it had the ability to be placed between objects, under, above, etc, allowing some flexibility in this respect.

I came up with a "pressure switch" that would turn itself off whenever pressure was released, and on otherwise. A sponge was the best possibility I found to accomplish this, given that it would always tend to go back to its original shape, facilitating to close and open the circuit when pressure was applied.

You can not see the embedded video below:

If you can see the video, please go to this link: [1]

<videoflash>higlHq2AbrM|640|400</videoflash>

Project 2

Experimental Resistance

You can not see the embedded video below:

If you can see the video, please go to this link: [2]

@@ Line 2: / Line 2: @@
 Improbable Switch
-In this assignment I experimented with different possible switches. Initially I  tested multiple conductive materials that would allow me to create an improbable switch. My first approach was a key that would trigger sound and light when inserted into a lock. It worked!!!
+In this assignment I experimented with different possible switches. Initially I  tested multiple conductive materials that would allow me to create an improbable switch. My first approach was a key that would trigger sound and light when inserted into a lock. After tests and fixes... It worked!!! :)
 Later on I got curious about the possibility to created a device that could be placed in different locations, so it had the ability to be placed between objects, under, above, etc, allowing some flexibility in this respect.