154
edits
GMU:Tutorials/Performance Platform/Sound System Stereo (view source)
Revision as of 17:06, 30 July 2016
, 30 July 2016→Trouble shooting
Keepstring (talk | contribs) |
Keepstring (talk | contribs) |
||
| Line 75: | Line 75: | ||
Situation 2: All are truned on but still no sound? | Situation 2: All are truned on but still no sound? | ||
Answer: | |||
* Check the Mac Pro and go to RME setting application(within the deck)to see if the sound card is selected to "Fireface 800" correctly. | * Check the Mac Pro and go to RME setting application(within the deck)to see if the sound card is selected to "Fireface 800" correctly. | ||
* Open up the totalmix control panel, sending sound signal from your playback device, then check it there has signal in the stereo channal(Default is 1/2). | * Open up the totalmix control panel, sending sound signal from your playback device, then check it there has signal in the stereo channal(Default is 1/2). | ||
* Check if you have already chose the "Master out" as output mode correctly, and of course, volume up until you could listen somthing. | * Check if you have already chose the "Master out" as output mode correctly, and of course, volume up until you could listen somthing. | ||