GMU:Tutorials/Performance Platform/Video Wall Signal Input: Difference between revisions
From Medien Wiki
(Created page with "=Video Wall Signal input= There are three ways to get a signal into the Video Wall * Using the video splitter module "Datapath" (DVI, connected to the Graphics Workstation "A...") |
|||
| Line 7: | Line 7: | ||
The Signal from the videosplitter box and the Pis share a single input of the screens using an HDMI switches. | The Signal from the videosplitter box and the Pis share a single input of the screens using an HDMI switches. | ||
'''The HDMI-switches need to be powered by the Pis in order to work! (Neither the Splitted Signal from the "Datapath" Box nor the Pis will work if thex are not)''' | '''The HDMI-switches need to be powered by the Pis in order to work! (Neither the Splitted Signal from the "Datapath" Box nor the Pis will work if thex are not)''' | ||
Revision as of 11:27, 20 February 2017
Video Wall Signal input
There are three ways to get a signal into the Video Wall
- Using the video splitter module "Datapath" (DVI, connected to the Graphics Workstation "Ariadne" on the right side of the right table)
- Using the "Daisychain" input (Displayport, connected to Sound Workstation "Enigma" on the left side of the right table)
- Using the RasPis (Distributed on the back of the wall
The Signal from the videosplitter box and the Pis share a single input of the screens using an HDMI switches.
The HDMI-switches need to be powered by the Pis in order to work! (Neither the Splitted Signal from the "Datapath" Box nor the Pis will work if thex are not)