GMU:Tutorials/Performance Platform/Video Wall Signal Input

Video Wall Signal input

There are three ways to get a signal into the Video Wall

• Using the video splitter module "Datapath" (DVI, connected to the Graphics Workstation "Ariadne" on the right side of the right table)
• Using the "Daisychain" input (Displayport, connected to Sound Workstation "Enigma" on the left side of the right table)
• Using the RasPis (Distributed on the back of the wall

The Signal from the videosplitter box and the Pis share a single input of the screens using an HDMI switches.

The HDMI-switches need to be powered by the Pis in order to work! (Neither the Splitted Signal from the "Datapath" Box nor the Pis will work if thex are not)

• 
• 

PDF versions:

• File:Videowall Ansteuerung.pdf
• File:Videowall Ansteuerung DVI.pdf