GMU:Tutorials/Performance Platform/Video Wall Signal Input: Difference between revisions
From Medien Wiki
| (2 intermediate revisions by the same user not shown) | |||
| Line 9: | Line 9: | ||
'''The HDMI-switches need to be powered by the Pis in order to work! (Neither the Splitted Signal from the "Datapath" Box nor the Pis will work if thex are not)''' | '''The HDMI-switches need to be powered by the Pis in order to work! (Neither the Splitted Signal from the "Datapath" Box nor the Pis will work if thex are not)''' | ||
<gallery> | |||
File:Videowall Ansteuerung.jpg | Videowall Control | |||
File:Videowall Ansteuerung DVI.jpg | Videowall Control DVI | |||
</gallery> | |||
PDF versions: | |||
*[[File:Videowall Ansteuerung.pdf]] | |||
*[[File:Videowall Ansteuerung DVI.pdf]] | |||
Latest revision as of 14:05, 29 March 2017
Video Wall Signal input
There are three ways to get a signal into the Video Wall
- Using the video splitter module "Datapath" (DVI, connected to the Graphics Workstation "Ariadne" on the right side of the right table)
- Using the "Daisychain" input (Displayport, connected to Sound Workstation "Enigma" on the left side of the right table)
- Using the RasPis (Distributed on the back of the wall
The Signal from the videosplitter box and the Pis share a single input of the screens using an HDMI switches.
The HDMI-switches need to be powered by the Pis in order to work! (Neither the Splitted Signal from the "Datapath" Box nor the Pis will work if thex are not)
Videowall Control
Videowall Control DVI
PDF versions: