File:Working 3D wistle.jpg: Difference between revisions

Latest revision as of 18:42, 6 August 2010

This is an image of a whistle printed on our Rapman. The design is by Zaggo. The file is available on thingiverse.

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Thumbnail	Dimensions	User	Comment
current	17:52, 6 August 2010		1,240 × 1,024 (226 KB)	Sebastian (talk \| contribs)
	17:48, 6 August 2010		1,576 × 1,301 (417 KB)	Sebastian (talk \| contribs)

You cannot overwrite this file.

The following 2 pages use this file:

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Camera manufacturer	LEICA
Camera model	C-LUX 2
Exposure time	1/15 sec (0.066666666666667)
F Number	f/2.8
ISO speed rating	200
Date and time of data generation	18:58, 6 August 2010
Lens focal length	4.6 mm
Orientation	Normal
Horizontal resolution	72 dpi
Vertical resolution	72 dpi
Software used	Ver.1.0
File change date and time	18:58, 6 August 2010
Exposure Program	Normal program
Exif version	2.21
Date and time of digitizing	18:58, 6 August 2010
Image compression mode	4
APEX exposure bias	0
Maximum land aperture	3 APEX (f/2.83)
Metering mode	Pattern
Light source	Unknown
Flash	Flash did not fire, compulsory flash suppression
Color space	sRGB
Sensing method	One-chip color area sensor
Custom image processing	Normal process
Exposure mode	Auto exposure
White balance	Auto white balance
Digital zoom ratio	0
Focal length in 35 mm film	28 mm
Scene capture type	Standard
Contrast	Normal
Saturation	Normal
Sharpness	Normal

@@ Line 1: / Line 1: @@
 == Summary ==
+This is an image of a whistle printed on our Rapman. The design is by [http://www.thingiverse.com/Zaggo Zaggo]. The file is available on [http://www.thingiverse.com/thing:1046 thingiverse].
 == Copyright status: ==
 == Source: ==