IFD:Fingies/Hardware: Difference between revisions

Latest revision as of 15:18, 30 October 2014

List of Sensors and Actors used on the Fingies Cards

feel free to structure, improve, add useful info on this page - I just created this page to prepare a workshop and buy the necessary components.

Shake: Accelerometer (MMA1251KEG) http://de.rs-online.com/web/p/beschleunigungssensoren-ics/7522311/

IR-Receiver: Detects the Infrared Signals from a TV Remote (36kHz carrier and 38 kHz carrier) http://de.farnell.com/vishay/tsop75538wtr/ir-empfaenger-heimdall-agc5-38khz/dp/2251430?CMP=i-bf9f-00001000 http://de.farnell.com/vishay/tsop75536wtt/ir-empfaenger-heimdall-agc5-36khz/dp/2251427?CMP=i-bf9f-00001000

RGB-LED: SMD LED 5050 RGB PLCC6 http://www.ebay.de/itm/50x-RGB-SMD-5050-LED-PLCC-6-3-Chip-/321560900744?pt=RC_Modellbau&hash=item4ade85f488 http://www.ebay.de/itm/10-20-50-100-500-1000-RGB-Leds-5050-SMD-Rot-Grun-Blau-LED-PLCC6-Strippe-Leiste-/130950644679?pt=Bauteile&var=&hash=item1e7d4443c7

Humidity: Printed Sensor, based on resistance of the base material when it becomes wet. Only a resistor needed for the measurement. around 50k to 100k worked well on thick paper in our design.

Bend Sensor (Watterott) http://www.watterott.com/de/Flex-Sensor-45

Pressure (readily made) http://www.watterott.com/de/Drucksensor-127mm

Pressure (printed) - same as Printed Humidity Sensor - responds to skin resistance on printed traces.

Button (mechanical) http://de.farnell.com/te-connectivity-alcoswitch/fsm4jsma/taster-mikro-fsm4jsma-h-5mm-smd/dp/3801305

Magnetic Fields: http://de.farnell.com/honeywell-s-c/ss39/sensor-hall-effekt-linear-sot23/dp/2292924

Temperature: http://de.farnell.com/microchip/mcp9700at-e-tt/thermal-sensor-2-3-5-5v-sot23-3/dp/1605577

Vibration Motor: Any cellphone's vibration motor can be used. I used the one from samsung gt8150 or Nokia 2630 as it has some cables attached, is sealed and comes with a sticky back that can be put on the printed circuits... http://www.watterott.com/de/Vibrating-Disk-Motor http://stellatech.com/nokia-2630-vibra-module,a,en,811798.html

Flat Touch Potentiometer Ring (HotPot) http://www.watterott.com/de/HotPot-Rotary-Potentiometer

PIR-Sensor (Heat): http://de.rs-online.com/web/p/infrarot-sensoren/7214912/?searchTerm=721-4912

Piezo (Speaker) Conrad (or a little less shipping cost on digitalo.de): http://www.conrad.de/ce/de/product/710397/Piezokeramisches-Element-EPZ-Serie-4400-Hz-Inhalt-1-St http://www.digitalo.de/products/224569/Piezoelement-Epz-27ms44w.html

Piezo (Microphone): Same as Speaker, but used as Microphone

@@ Line 6: / Line 6: @@
 http://de.rs-online.com/web/p/beschleunigungssensoren-ics/7522311/
-'''IR-Receiver:''' Detects the Infrared Signals from a TV Remote
+'''IR-Receiver:''' Detects the Infrared Signals from a TV Remote (36kHz carrier and 38 kHz carrier)
+http://de.farnell.com/vishay/tsop75538wtr/ir-empfaenger-heimdall-agc5-38khz/dp/2251430?CMP=i-bf9f-00001000
+http://de.farnell.com/vishay/tsop75536wtt/ir-empfaenger-heimdall-agc5-36khz/dp/2251427?CMP=i-bf9f-00001000
 '''RGB-LED: SMD LED 5050 RGB PLCC6'''
@@ Line 23: / Line 26: @@
 '''Button''' (mechanical)
+http://de.farnell.com/te-connectivity-alcoswitch/fsm4jsma/taster-mikro-fsm4jsma-h-5mm-smd/dp/3801305
 '''Magnetic Fields:'''
@@ Line 32: / Line 36: @@
 '''Vibration Motor:'''
 Any cellphone's vibration motor can be used. I used the one from samsung gt8150 or Nokia 2630 as it has some cables attached, is sealed and comes with a sticky back that can be put on the printed circuits...
+http://www.watterott.com/de/Vibrating-Disk-Motor
+http://stellatech.com/nokia-2630-vibra-module,a,en,811798.html
 '''Flat Touch Potentiometer Ring''' (HotPot)
@@ Line 37: / Line 43: @@
 '''PIR-Sensor''' (Heat):
+http://de.rs-online.com/web/p/infrarot-sensoren/7214912/?searchTerm=721-4912
 '''Piezo''' (Speaker)