GMU:I and my Max/Elizabeth McTernan: Difference between revisions

Line 1:

[[:File:Liz_Screen Recording 2020-11-28 at 16.07.43.mov]]

[[:File:test_analogue-to-digital-to-analogue.maxpat]]

Here's a patch-in-progress, now that I was successfully able to get my ultrasonic sensor readings to appear in the Max console. I'm also including a screen recording of the Max print feed, so you can see what's going on – I see that the console is breaking up the lines of data into smaller pieces (which I can imagine is simple enough to fix). For example, in Max/MSP, the word "distance" is broken up between several lines, and so are the numerical figures. Here is an example of how the same data shows up in the Arduino serial plotter. Just a note, I have included the word "distance" to also be printed, just to reduce confusion about values.

@@ Line 1: / Line 1: @@
+[[:File:Liz_Screen Recording 2020-11-28 at 16.07.43.mov]]
+[[:File:test_analogue-to-digital-to-analogue.maxpat]]
 Here's a patch-in-progress, now that I was successfully able to get my ultrasonic sensor readings to appear in the Max console. I'm also including a screen recording of the Max print feed, so you can see what's going on – I see that the console is breaking up the lines of data into smaller pieces (which I can imagine is simple enough to fix). For example, in Max/MSP, the word "distance" is broken up between several lines, and so are the numerical figures. Here is an example of how the same data shows up in the Arduino serial plotter. Just a note, I have included the word "distance" to also be printed, just to reduce confusion about values.