Frederic Schmidt: Difference between revisions

From Medien Wiki
No edit summary
No edit summary
Line 16: Line 16:


I opened the player and found the potentiometer and soldered it out. Next step was, to put a different one with a bigger range to the outside of the player to make it accessible while playing.
I opened the player and found the potentiometer and soldered it out. Next step was, to put a different one with a bigger range to the outside of the player to make it accessible while playing.
 
[[File:Pot and wires routing.png|center|thumb|792x792px|potentiometer and wires routing]]
The slightly thicker cables in black, blue and green were soldered to the electrical contacts where the old factory potentiometer was sitting.
The slightly thicker cables in black, blue and green were soldered to the electrical contacts where the old factory potentiometer was sitting.
[[File:Open cassette player.png|left|thumb|open cassette player with longer wires for the potentiometer]]
[[File:Open cassette player.png|left|thumb|open cassette player with longer wires for the potentiometer]]

Revision as of 16:19, 14 February 2024

Tired Machines Orchestra

For the Tired Machines Orchestra course, I was building two instruments out of old electronics, that someone else considered to be trash.

I found them at the recycling facility where we picked up the tired machines that still worked fine (most of them)

The Pitchman

The Pitchman was built out of an old Panasonic Walkman that still worked fine, when it fell into my hands and it still does, but now it has some extra features.

According to the speed, of the spinning motor inside cassette player, you are able to change the Pitch of whatever sound is recorded on the cassette.

I did some research on this and found out, that there is a small potentiometer where they set the speed at the factory to make the player spin at the right speed.

I opened the player and found the potentiometer and soldered it out. Next step was, to put a different one with a bigger range to the outside of the player to make it accessible while playing.

potentiometer and wires routing

The slightly thicker cables in black, blue and green were soldered to the electrical contacts where the old factory potentiometer was sitting.

open cassette player with longer wires for the potentiometer