IFD:Eclectic Electric!/DocumentationWS2013

Max Mustermann

Max_Mustermann/Week1

John Doe

John_Doe/Week1

Lydia

First Weeks Assigment.

1. Get That Soldering Done

Second Exercise.

2. Simply Sound

Main Project.

3. Playing Pong

Jonas Köhler / Martin Melcher / Benjamin Voßler

The Astable Multivibrator In A Honey Jar

Adrian

Jonas_L_Aidas_Adrian/Week1

Sebastian

Light dependant LED

Group: Heinrich, Sebastian, Deniz

For our power circuit we used 5 LEDs and 5 light dependant resistors. The idea was to control the brightness of the LEDs with our fingers by blocking the light. We first tried it with just one, and later put everything together in a parallel circuit. While we were soldering we discovered that it is quite difficult to solder three cables at one connection. The picture below shows the result.

Homework = we were asked to hack or modify a simple sound recorder, by changing the resistor.

I melted off the resistor on the board. I then added a Light Depending Resistor. I also added connector ports to the other cables so that it can be changed more often with more ease. Images of the modification below.

So now, depending on how much light the LDR receives, the sound that you record with the device will be processed slower (Less light) or faster (more light) resulting in a slow and fast playback which includes pitch change.

My main Project for tho class, is to re-program a pair of VR glasses (shutter glasses) so that they can be used to change the frequency (flashing) of natural light sources, e.g the Sun, instead of the more widely used artificial light.

Inspired by LUCIA Nº03: http://www.gesund-im-licht.at

DOCUMENTATION PDF: Media:Eclectic_Electric_WS14.pdf

VIDEO: https://www.youtube.com/watch?v=bmfWK6aJ0ro

Heinrich

Light dependant LED

Group: Heinrich, Sebastian, Deniz

For our power circuit we used 5 LEDs and 5 light dependant resistors. The idea was to control the brightness of the LEDs with our fingers by blocking the light. We first tried it with just one, and later put everything together in a parallel circuit. While we were soldering we discovered that it is quite difficult to solder three cables at one connection. The picture below shows the result.

Deniz

Light dependant LED

Group: Heinrich, Sebastian, Deniz

For our power circuit we used 5 LEDs and 5 light dependant resistors. The idea was to control the brightness of the LEDs with our fingers by blocking the light. We first tried it with just one, and later put everything together in a parallel circuit. While we were soldering we discovered that it is quite difficult to solder three cables at one connection. The picture below shows the result.