GMU:DIY-Microscopy/Nils: Difference between revisions

From Medien Wiki
Line 2: Line 2:
[[Image:technical_drawing_Nils_02.jpg|300px|]]
[[Image:technical_drawing_Nils_02.jpg|300px|]]


The aproach was to build a cylinder form for the microscope in order to pick up the shape of the petridish. two srews at each side of the cylinder are added to manually lift and lower the plate with the camera (which is insider of the cylinder).
The aproach was to build a cylinder form for the microscope in order to pick up the shape of the petridish.  
two srews at each side of the cylinder are added to manually lift and lower the plate with the camera (which is insider of the cylinder).


== 3D Model ==
== 3D Model ==

Revision as of 10:22, 12 November 2012

Miroscopy stage construction

Technical drawing Nils 02.jpg

The aproach was to build a cylinder form for the microscope in order to pick up the shape of the petridish. two srews at each side of the cylinder are added to manually lift and lower the plate with the camera (which is insider of the cylinder).

3D Model

3D Model Mainnils.jpg 3D ModelPlatte nils.jpg

File:3D Model Main.zip File:3D Model Platte.zip File:3D Model Sketchup.zip

You can download the .stl files of the plate and the plain cylinder

Stage construction cardboard model

Model side view
Model top view