GMU:3DIY/Printer queue

From Medien Wiki
< GMU:3DIY
Revision as of 18:42, 2 June 2010 by Sebastian (talk | contribs) (Created page with 'so, the next step will be the one you are all craving for: Printing! fair enough and you shall do so, but as none of us has much experience it would be nice if you would document…')
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

so, the next step will be the one you are all craving for: Printing! fair enough and you shall do so, but as none of us has much experience it would be nice if you would document your printing and the tricks and tweak you find out. again the wiki is the perfect place for this.

as well as for the 'printer queue`:

the printer has found it's new home in room 008 and is sort of available for you to be used. at the moment it is jammed but we'll look into that as soon as we can. the key for the room can for the moment be booked via me and picked up at our secretary, frau hellmann.

and always obey the two rules: do not break anythink. do not hurt yourself.

please document your printer usage and your experiences on the wiki. We will also set up a section of the wiki, where a 'printer queue' can be found: a schedule, where you can sign in for printing. with your name, the name and a picture of the thing you are going to print, the estimated print time. And when you are done a print report: featuring the settings you used, the time and amout of material it took, what issues you came across, how you fixed it ... the amount of material you used...

The printer queue

Image of file File Name Date Time Name Print report (Material, temperature, time, feed rate, etc.) Amount of time needed Amount of material used Issues Fixes Image of printed object
.jpg des File
Datei Name Daum Uhrzeit Name Druckbericht (Material, Temperatur, Zeit, Vorschub, etc.) Gebrauchte Zeit Verbrauchte Menge an Material Probleme Und wie sie gelöst wurden
.jpg des gedruckten Objekts