GMU:Tutorials/Performance Platform/Measuring Motion with Processing

Measuring Motion

measuring motion

Introduction:

Through the motion tracking system man could get basic information about one or more persons’ movements in the specific area. Normally these information describe the status of some important nodes of a person, such as head, arms, hip, feet and so on.
This article is mainly a step by step tutorial about different ways of accumulating motion data(such as the speed of a person or the expansion among three persons) into a single value. In the following examples, these simple values are visualised in a simple basic way in processing: changing the background color.

Preparations:

Man has to calibrate the Tracking platform at first! Reference: Tracking Platform Calibration
About how to use a single value getting from the Capture to control processing part, you could check the following tutorial by Yun Liu: Controlling Processing with the Captury

Challenges:

One person mode: Calculating the root speed and visualizing this value by changing the background color.
Groups of persons mode: Measuring the pairwise distances between root nodes of three persons.

Process:

- Collecting the correlative data for the speed: Through the connecting of OSC and Motion Tracking platform, the root position and the updated data of one person could be obtained. The shifting distance and the relevant time decides the speed of the root node.

Getting data from theCaputry then calculating the speed of the root

public void updateRoot(float x, float y, float z) {    
    x2 = abs(x - x1);
    y2 = abs(y - y1);
    z2 = abs(z - z1);
    
    x1 = this.x;
    y1 = this.y;
    z1 = this.z;
   float distance = sqrt(sq(x2)+sq(y2)+sq(z2));
   //Record the duration time that this bone move from the first point to the second point
   temptime = millis();
   time2 = (temptime - time1)/1000;
    //Calculate the velocity of this bone
    vel = (distance/time2)*100;
  }

2. Calculating the speed of the root node; The shifting distance and the relevant time decides the speed of the root node. For the node vector, the movement in x,y,z position should be all considered.
<source lang="java"> float speed (Sphere sphere1) {

 float vel2 = sphere1.vel-vel1;
 vel1 = sphere1.vel;
 return vel2;

} <source> 3.Calculating the distance between two root points. <source lang="java"> float distance (Sphere sphere1,Sphere sphere2) {

   float distance = sqrt(sq(sphere1.x-sphere2.x)+sq(sphere1.y-sphere2.y)+sq(sphere1.z-sphere2.z));
   float dis2;
   dis2 = distance;
   distance = distance-dis1;
   dis1 = dis2;
   return distance;

} <source> 4.Calculating the area of the triangle make up by three root points. <source lang="java"> float triangleSize(Sphere sphere1,Sphere sphere2,Sphere sphere3)

 {
   float side_a = sqrt(sq(sphere1.x-sphere2.x)+sq(sphere1.y-sphere2.y)+sq(sphere1.z-sphere2.z));
   float side_b = sqrt(sq(sphere1.x-sphere3.x)+sq(sphere1.y-sphere3.y)+sq(sphere1.z-sphere3.z));
   float side_c = sqrt(sq(sphere2.x-sphere3.x)+sq(sphere2.y-sphere3.y)+sq(sphere2.z-sphere3.z));
   float s = (side_a+side_b+side_c)/2;
   float triangleSize = sqrt(s*(s-side_a)*(s-side_b)*(s-side_c));
   float size2;
   size2 = triangleSize;
   triangleSize = triangleSize-size1; 
   size1 = size2;
   return triangleSize;
 }

<source> Three root positions could form a triangle in the space. With the help of Heron’s formula, the area of the triangle could be calculated.

5.According to the speed, distance, area giving different background color. <source lang="java"> //the maximum area is 6*6/2=18m^2,mapping the value of the area to the color of the background

   float size = triangleSize(sphere1,sphere2,sphere3);
   size = map(size,0,18,0,255);
   size = ceil(size);
   background(size);

//the maximum distance is 6m,mapping the value of the distance to the color of the background

   float dis = ditance(sphere1,sphere2);
   dis = map(dis,0,6,0,255);
   dis = ceil(dis);
   background(dis);

//the maximum speed of human is 10m/s,mapping the value of the speed to the color of the background

   float speed = speed(sphere1);
   speed = map(speed,0,10,0,255);
   speed = ceil(speed);
   background(speed);