Stuff that has been printed on the RapMan. Please add your own projects.
The Whistle
The whistle is one of the first things printed on our RapMan. The design is by Zaggo. The file is available on thingiverse. G-Code conversion with Skeinforge was tricky, but with Axon it was a walk in the park.
Bacteria Game race track
| Dimension: | 14cm x 15cm x 1cm |
|---|---|
| Material: | PLA |
| Print duration: | 4.5 hours |
Race track for the Bacteria Game.
Bacteria Game objects
| Dimension: | Ø 3.5 cm (big), Ø 2.5cm (small), 9cm x 2cm (wall) |
|---|---|
| Material: | ABS(white) and PLA(transcullent) |
| Print duration: | 20min—30min |
Objects for petri dishes. Made for the Bacteria Game.
Pyramid
| Dimension: | 5cm x 5cm x 12cm |
|---|---|
| Material: | ABS(white) and PLA(transcullent) |
| Print duration: | 3.5 hours |
Both prints are not finished. The pyramid is hollow and has a 2mm wall.
Shape studies
| Dimension: | 6cm x 2.3cm x 2.3cm |
|---|---|
| Material: | ABS |
| Print duration: | 2.5 hours |
Shape studies for bigger clay models.