Miroscopy stage construction
The aproach was to build a cylinder form for the microscope in order to pick up the shape of the petridish. two srews at each side of the cylinder are added to manually lift and lower the plate with the camera (which is insider of the cylinder).
3D Model
You can download the .stl files of the plate and the plain cylinder
Stage construction cardboard model
- CardboardModel nils 04.jpg Model side view
- CardboardModel nils 05.jpg top view
3D Printed Model
This Model was printed with a Rapman 3.1 within 4h 37min. i used sketchup to create the needed .stl file and then used netfabb to check it. Last step was to create a .bfb file (for Rapman) via Axon (Windows only) likewise you could use Skeinforge.