1,291
edits
→Creating 3d objects
| Line 5: | Line 5: | ||
There are a few guidelines you should keep in mind when desinging objects for the 3d printer. | There are a few guidelines you should keep in mind when desinging objects for the 3d printer. | ||
* You can't print steeper slopes than 45 degrees. | * You can't print steeper slopes than 45 degrees. | ||
* Solid walls must have a specific thickness, currently we are limited to | * Solid walls must have a specific thickness, currently we are limited to 1mm, 2mm, 3mm... Any x.5mm will result in hollow walls. This is due to our extruder nozzle being 0.5mm in diameter. | ||
* When parts must fit into each other design with a tolerancy of ~0.5mm. | * When parts must fit into each other design with a tolerancy of ~0.5mm. Any holes or inner sides must be .5mm larger: a 3.5mm hole will be printed as 3mm hole. | ||
==Before you print== | ==Before you print== | ||