IFD:PhysicalComp2011/Dianna Mertz: Difference between revisions

IFD:PhysicalComp2011/Dianna Mertz (view source)

Revision as of 20:26, 15 December 2011

202 bytes removed , 15 December 2011

m

no edit summary

Max

Bureaucrats, Administrators

12,297

edits

@@ Line 10: / Line 10: @@
 <br>
 Above image source: Flickr user iDecrease
-<br><br>
-<b>Setup</b><br>
+===Setup===
 http://farm4.static.flickr.com/3254/2507585112_60cc338bfb_m.jpg
-<br>
 Above image source: http://code.google.com/p/sserial2mobile/
-<br><br>
 [http://code.google.com/p/sserial2mobile/ <b>Arduino to Mobile Code Example</b>]
+<syntaxhighlight lang="cpp">
+  SSerial2Mobile phone = SSerial2Mobile(2,3);
+  phone.sendTxt("+017655555555","Remember to buy more coffee!");
+  phone.sendEmail("ilovecoffee@gmail.com", "Remember to buy more coffee!");
+  Serial.print("Batt: ");
+  Serial.print(phone.batt());
+  Serial.println("%");
+  Serial.print("RSSI: ");
+  Serial.println(phone.rssi());
+</syntaxhighlight>
+[[../code#III Potentiometer .28Arduino.29|Photo Resistor Code Example (from class)]]
+<syntaxhighlight lang="cpp">
+  // specify the pin numbers we are going to use:
+  int ledPin = 13;
+  int potiPin = 3;
+  // create a variable to hold the value from the poti:
+  int potiValue;
+  void setup(){
+  // set the pin mode of the led pin to  act as an output:
+  pinMode(ledPin,OUTPUT);
+  // establish a serial connection:
+  Serial.begin(9600);
+  }
+  void loop(){
+  // read the current value of the poti pin
+  // and store it in the variable potiValue:
+  potiValue = analogRead(potiPin);
+  // if the value is over a certain threshold
+  // (here it's 511 or the middle of the range),
+  // turn the LED on, otherwise turn it off:
+  if(potiValue > 511){
+    digitalWrite(ledPin,HIGH);
+  }else{
+    digitalWrite(ledPin,LOW);
+  }
+  // in oder to send the poti value as one byte (0-255)
+  // we have to scale it from the original range (0 - 1023):
+  int scaledVal = map(potiValue,0,1023,0,255);
+  // send the scaled value via the serial port as a byte:
+  Serial.print(scaledVal,BYTE);
+  // wait a little bit to not overload the serial buffer:
+  delay(50);
+  }
+</syntaxhighlight>
-  SSerial2Mobile phone = SSerial2Mobile(2,3); <br>
+===Equipment===
-  phone.sendTxt("+017655555555","Remember to buy more coffee!"); <br>
-  phone.sendEmail("ilovecoffee@gmail.com", "Remember to buy more coffee!"); <br>
-  Serial.print("Batt: "); <br>
-  Serial.print(phone.batt()); <br>
-  Serial.println("%"); <br>
-  <br>
-  Serial.print("RSSI: ");<br>
-  Serial.println(phone.rssi());<br>
-[http://www.uni-weimar.de/medien/wiki/IFD:PhysicalComp2011/code#III_Potentiometer_.28Arduino.29 <b>Photo Resistor Code Example (from class)</b>]
-  // specify the pin numbers we are going to use:<br>
+* [http://www.sparkfun.com/products/9607 Cellular Shield]
-  int ledPin = 13;<br>
+* SIM card
-  int potiPin = 3;<br>
+* Antenna
-  // create a variable to hold the value from the poti:<br>
+* Arduino
-  int potiValue;<br>
+* Photoresistor
- <br>
+* Coffee can
-  void setup(){<br>
+* Depleting coffee grounds
-  // set the pin mode of the led pin to  act as an output:<br>
-  pinMode(ledPin,OUTPUT);<br>
-  // establish a serial connection:<br>
-  Serial.begin(9600);<br>
-  }<br>
- <br>
-  void loop(){<br>
-  // read the current value of the poti pin <br>
-  // and store it in the variable potiValue:<br>
-  potiValue = analogRead(potiPin);<br>
- <br>
-  // if the value is over a certain threshold<br>
-  // (here it's 511 or the middle of the range),<br>
-  // turn the LED on, otherwise turn it off:<br>
-  if(potiValue > 511){<br>
-    digitalWrite(ledPin,HIGH);<br>
-  }else{<br>
-    digitalWrite(ledPin,LOW);<br>
-  }<br>
- <br>
-  // in oder to send the poti value as one byte (0-255)<br>
-  // we have to scale it from the original range (0 - 1023):<br>
-  int scaledVal = map(potiValue,0,1023,0,255);<br>
-  // send the scaled value via the serial port as a byte:<br>
-  Serial.print(scaledVal,BYTE);<br>
-  // wait a little bit to not overload the serial buffer:<br>
-  delay(50);<br>
-  }<br>
-<br>
-<b>Equipment:</b>
-<br>
-[http://www.sparkfun.com/products/9607 Cellular Sheild] <br>
-SIM card <br>
-Antenna <br>
-Arduino <br>
-Photoresistor <br>
-Coffee can <br>
-Depleting coffee grounds <br>
-<b>Tasks:</b><br>
+<b>Tasks:</b>
 <ul>
 <li>Acquire sim card</li>