GMU:Introduction to Microscopy/Denise Nicoau

From Medien Wiki

|WEEK ONE|

4/11/2020

Introduction to the BIO Lab

I examined a puddle of mud sample and a soil sample collected the evening before, and a purple mold sample that was already in the lab. We saw microorganisms in the mud sample.

Glossary

  • magnification: making images appear larger
  • resolution: ability to distinguish between two objects
  • slide: flat rectangles of thin glass which hold the sample under the microscope
  • sample: something you collect to examine
  • specimen: the sample on the slide when you look at it through the microscope
  • cover slip/cover glass: a smaller and thinner sheet of glass that is placed over the specimen
  • light microscope: it uses light in order to see an image
  • electron microscope: it uses electron beams to see images (you can see a virus)
  • compound microscope: it has two sets of lenses (eyepiece lenses - objective lenses)
  • objective lenses: a set of lenses with different magnifications (e.g., 4x, 10x, 40x - 4 times: lowest magnification, 40 times: highest magnification)
  • total magnification: is given from the multiplication between eyepiece lens magnification and objective lens magnification (e.g., 10x ocular and 4x objective > 40x total magnification).
  • coarse focus and fine focus: two knobs which raise or lower the stage which helps with focusing.
  • stage knobs: the move from side to side which helps exploring/scanning the specimen.
  • mounting: securing the sample on the slide
  • dry mount: a simple kind of mounting where the object is merely placed on the slide (this mounting can be successfully used for viewing specimens like pollen, feathers, hairs, etc.)
  • wet mount: the specimen is placed in a drop of water or other liquid held between the slide and the cover slip. (this method is commonly used to view microscopic organisms that grow in pond water or other liquid media).
  • disposable pipette
  • stage clips: clips which secure the slide
  • lens paper: the only paper you can use to wipe lenses
  • staining: a technique used to enhance contrast in samples
  • immersion oil: able to increase resolution (applicable if you have a 100x objective lens)
  • fixation: it refers to the process of attaching cells to a slide; it is often achieved either by heating or chemically treating the specimen. It kills microorganisms in the specimen, stopping their movement and metabolism while preserving the integrity of their cellular components for observation
  • simple staining: a single dye is used to emphasize particular structures in the specimen
  • differential staining: more dyes are used to emphasize particular structures in the specimen


6/11/2020

Brogen and I collected different samples in the Ilm Park and examined them in the lab (spider web, tree bark, river water, mushroom spores, wet leaves). We found microorganisms moving in the river water and some little bugs both in the tree bark and in the spider web samples invisible to the naked eye. Mushroom spores were really interesting.

I examined again the mud samples: microorganisms were still there.

 

|WEEK TWO|

14/11/2020

Research: staining technique

Staining Microscopic Specimens

Basic histological staining methods

In their natural state, most of the cells and microorganisms that we observe under the microscope lack colour and contrast. This makes it difficult, if not impossible, to detect important cellular structures and their distinguishing characteristics without artificially treating specimens. Staining is almost always applied to colour certain features of a specimen before examining it under a light microscope. Stains, or dyes, contain salts made up of a positive ion and a negative ion.

Dyes are selected for staining based on the chemical properties of the dye and the specimen being observed, which determine how the dye will interact with the specimen. Dyes can be basic, acidic or a combination of the two. Acidic dyes carry a negative charge, so they bind to positively charged cells structure. On the other hand basic dyes carry a positive charge, so they bind to negatively charged cells structure.

In most cases, it is preferable to use a positive stain, a dye that will be absorbed by the cells or organisms being observed, adding colour to objects of interest to make them stand out against the background. However, there are scenarios in which it is advantageous to use a negative stain, which is absorbed by the background but not by the cells or organisms in the specimen. Negative staining produces an outline or silhouette of the organisms against a colourful background.

   


Commonly used basic dyes which serve as positive stains

  • basic fuchsin
  • crystal violet
  • malachite green
  • methylene blue
  • safranin typically


Commonly used acidic dyes which serve as negative stains

  • acid fuchsin
  • eosin
  • rose bengal


Simple staining vs. differential staining

A simple stain will generally make all of the organisms in a sample appear to be the same colour, even if the sample contains more than one type of organism. In contrast, differential staining distinguishes organisms based on their interactions with multiple stains. In other words, two organisms in a differentially stained sample may appear to be different colours.

Differential staining techniques commonly used

  • Gram staining
  • acid-fast staining
  • endospore staining
  • flagella staining
  • capsule staining.