IFD:PhysicalComp2011

From Medien Wiki

Fachmodul
Lehrperson: Frederic Gmeiner
Bewertung: 6 ECTS, 4 SWS
Termin: Montag, 15:15 bis 18:30 Uhr
Ort: Marienstraße 7b, Raum 104 (wird voraussichtlich noch geändert!)
Erster Termin: 17.10.2011

Beschreibung

Data Stories: Tools for self-reflection

Datenjounalismus bezeichnet allgemein die Verwendung von öffentlich zugänglichen Daten zur Generierung von (interaktiven) Informationsgrafiken zur Erweiterung klassischer journalistischer Reportagen. Die Form der »Datengeschichte« können jedoch auch für den persönlichen Gebrauch interessant sein, denn durch die stetig wachsende Präsenz von Sensoren in Consumer Geräten ist es heute sowohl für den privaten und individuellen Zweck ohne große Mühe machbar eigene Daten über sich selbst und seine Umwelt zu sammeln.

Wie lassen sich diese Daten, die bei der Benutzung von (digitalen) Geräten im Alltag entstehen, nutzen? Welchen Mehrwert können diese Archive für uns selbst oder für eine Gemeinschaft haben? Wie lassen sich gesammelte Informationen inszenieren, sodass diese einen persönlichen Wert erhalten?

Im Mittelpunkt des Kurses steht ein Selbstexperiment bei dem selbst gewählte Daten über einen Zeitraum gesammelt und anschließend inszeniert werden sollen. Hierbei soll eine Übersetzung eines analogen Datensatzes in einen digitalen (oder umgekehrt) stattfinden wobei die dafür verwendeten Geräte und Programme gemeinsam im Rahmen des Kurses entwickelt werden.

Auf der einen Seite werden technische Aspekte und Grundlagen des physical computings behandelt. Ausgangspunkt hierfür ist die Arduino Microcontroller-Plattform sowie die Programmierumgebungen Processing und OpenFrameworks. Je nach vorhandenem Kenntnisstand der Teilnehmer und Anforderungen des jeweiligen Projektes werden weitere Themen angeschlossen, wobei dieses auch in Form von Referaten geschehen kann.

Gleichzeitig sollen alle Teilnehmer im Kurs ein eigenes Projekt entwickeln bei dem das Entwerfen individueller Werkzeuge und Strategien zur Sammlung und Inszenierung (persönlicher) Daten im Vordergrund steht. Dieses kann sowohl anwendungsorientiert wie frei künstlerisch sein.

English description

How can we utilise all the meta-data that is being created by the usage of our everyday (digital) devices for an individual purpose? What is the benefit of these archives for ourself or a community? In what way can we stage information, so that it becomes more personal and emotional?

Together we will develop individual tools and strategies to collect and expose (personal) data, either with an application-oriented or an artistic approach.

In order to realise these projects, students will learn about the technical aspects and basics of physical computing with a focus on the Arduino micro-controller as well as the Processing and OpenFramework environments.

Themen

  • Processing
  • OpenFrameworks
  • Object-oriented programming
  • Arduino
  • Overview and usage of libraries
  • Reading and controlling of common sensors and actuators
  • APIs and protocols like JSON / XML / OSC

Voraussetzungen

  • Programmier- und Elektronikkenntnisse sind wünschenswert, jedoch nicht zwingend notwendig.
  • Bitte wenn möglich einen eigenen Computer mitbringen.

Anmeldung

Die Bewerbung für eine Teilnahme am Kurs muss bis zum 10.10.2011 per E-Mail mit dem Betreff: Bewerbung PhysicalComp2011 und folgenden Angaben an: hello (at) fregment.com gesendet werden.

  • Name
  • Fachrichtung und Fachsemester
  • Matrikelnummer
  • Angabe der geltenden Prüfungsordnung
  • Gültige E-Mail-Adresse @uni-weimar.de (zur Bestätigung der Anmeldung) Warum?

Sollte es mehr als 15 Bewerber geben, entscheidet das Motivationsschreiben, die Zugehörigkeit zur Fakultät/des Studiengangs und ggf. die Reihenfolge der Anmeldungen über die Aufnahme in den Kurs.

Leistungsnachweis

Aktive Teilnahme, Dokumentation einer teilweise oder ganz umgesetzen Projektidee im Wiki

Zielgruppe

Master-Studenten der Fakultäten Medien, Gestaltung und der Medienarchitektur

Syllabus

Termine des Semesters

  1. tba

Literatur

Hinweis: Die hier aufgeführte Literatur ist optional und nicht verbindlich!

Mailinglist

Please subscribe to the list "Datastories" here: https://mg.medien.uni-weimar.de/mailman/listinfo/datastories


Links

Data visualisation

Technology

Student Links

Dianna Mertz

Interesting projects that utilize data:

Thematic interests:

Jelena Djokic

Julia Putscher

Patawat Phamuad

Project Synopsis

Caren-Maria Jörß

Stephan Thiel - interaction and information designer:

Sebastian

Augusto Gandia

http://keiichimatsuda.com/augmentedcity.php http://keiichimatsuda.com/augmented.php


24.10.2011 Processing sketches

I Simple shapes

/* SIMPLE SHAPES
 *
 * Get familiar with the coordinate system and the way
 * shapes are beeing drawn onto the screen.
 *
 * Frederic Gmeiner 2011
 */

// define the width and height of the display window:
// 400 x 400 px
size(400,400);

// draw the following shapes without outlines:
noStroke();
//set the fill color of the following shapes to pure red:
fill(255,0,0);
// draw a rectangle:
rect(230,230,50,100);
// set the fill color to pure green and draw a rectangle:
fill(0,255,0);
rect(200,200,50,100);
// set the outline color to pure blue:
stroke(0,0,255);
// draw the following shapes without any fill color:
noFill();
// draw a ellipse:
ellipse(100,100,20,20);



II Relations

/* RELATIONS
 *
 * Instead of using fixed values, we use variables
 * to formulate relations. In this example a structure
 * based on two vertical parallel lines with a circle 
 * in between is formulated. 
 *
 * Frederic Gmeiner 2011
 */
 
// variable to store the radius of the circle:
int rad = 40;
// variables to store the x and y position of the structure:
int startPointX = 100;
int startPointY =100;

size(400,400);

// left line starts at the defined values and has a length of 80px:
line(startPointX, startPointY, startPointX, startPointY+80);

// the ellipse in between the two lines has a radius of "rad",
// so the width and hight is "2*rad". Since ellipses have their
// origin in the middle in processing, we need to add the radius
// to our "startPointX" value to have it centered in between the lines:
ellipse(startPointX+rad, startPointY+40, 2*rad, 2*rad);

// the right line is set in relation to the width of the circle: 
line(startPointX+(2*rad), startPointY, startPointX+(2*rad), startPointY+80);



III Functions

/* FUNCTIONS
 * 
 * Here we define a custom function ("crossFunction()") which draws a 
 * cross onto the screen.
 * It takes the parameters: X value, Y value and the size.
 * Also the continuous mode is introduced, which 
 * uses the processing functions setup() and draw().
 * Via the pre-defined variables "mouseX" and "mouseY" we
 * can access the current mouse position.
 *
 * Frederic Gmeiner 2011
 */

// the setup() function is called everytime the program
// starts once.
void setup(){
  size(400,400);
}

// the draw() function is the main loop function of your program:
// after every operation in the draw function has been 
// called, the draw function is called again. this
// goes on until the program quits.
void draw(){
  background(255);
  crossFunction(mouseX,mouseY,10);
}

// this is the definition of the custom function "crossFunction()":
void crossFunction(int crossX, int crossY, int crossSize){
  line(crossX-crossSize/2, crossY-crossSize/2, crossX+crossSize/2, crossY+crossSize/2);
  line(crossX+crossSize/2, crossY-crossSize/2, crossX-crossSize/2, crossY+crossSize/2);
}



IV Movement & conditions

/* MOVEMENT & CONDITIONS
 * 
 * By changing a variable during the runtime, 
 * we can alter the condition of the program.
 * Here we increment an integer variable
 * each time draw() is called. This variable is
 * used for the x-position of a line, thus
 * creating the illusion of a continuous movement
 * from left to right. 
 * Via the "if" and "else" branches we can react
 * to different states of the program and alter it
 * accordingly.
 *
 * Frederic Gmeiner 2011
 */

// variable to store the x-position of the line:
int lineX = 0;

void setup(){
  size(500,300);
}

void draw(){
  // clear the background
  background(255);
  
  // if the x position of the line is larger than the middle of the screen:
  if(lineX > width/2){
     // change the stroke colour to pure red:
    stroke(255,0,0);
  // if the x position of the line is smaller than the middle of the screen:
  }else{
    // set the stroke coulour to black:
    stroke(0,0,0);
  }
  
  // draw a vertical line from the top (0) to the bottom ("height") at
  // the current x-position:
  line(lineX,0,lineX,height);
  
  // increment the lineX variable by 1 
  // (you could also simply write "lineX++")
  lineX = lineX+1;
  
  // use the "println()" function to show the value of variables 
  // in the console. this is helpful for debugging.
  println(lineX);
}



Exercise I: Bouncing Line

This is one possible solution to achieve that the line from the example above changes it direction when it reaches the left and right boundaries of the sketch window. 

/* BOUNCING LINE
 * 
 * This is a modification of the previous sketch
 * so that the line will bounce off the left and
 * right borders of the window. Notice the introduction
 * of the variable "speed" to control the speed and 
 * direction of the moving line.
 *
 * Frederic Gmeiner 2011
 */
 
// variable to hold the currect x position of the line
int lineX = 0;
// variable that controls the speed and direction
int speed =1;

void setup(){
  size(500,300);
}

void draw(){
  background(204);
  
   // if the x position of the line exceeds the right border of the window:
   // change the direction by setting the speed to a negative value
  if(lineX > width){
    speed = -1; 
  }
  // accordingly set the speed to a positive value as soon as the line touches 
  // the left border.
  if(lineX < 0 ){
    speed = 1;
  }
  
  // here the new x position is calculated by adding the speed onto the 
  // current x position. if speed is -1, lineX decreases. if speed is 1, lineX 
  // increases.
  lineX = lineX + speed;
  
  // draw the line based on the calculated x position:
  line(lineX,0,lineX,height);
}



Exercise II: A frightened rectangle

Write a sketch that contains one rectangle with a size of 20x20px.
As soon as the mouse pointer is over the rectangle, the rectangle starts to shiver.

Some useful hints:


07.11.2011 Processing sketches

Exercise I: Bouncing Line (Advanced)

/* BOUNCING LINE ADVANCED
 * 
 * Notice the introduction of the variables 
 * "speed" and "direction to control the speed 
 * and direction of the moving line inependently.
 *
 * Frederic Gmeiner 2011
 */

// variable to hold the currect x position of the line
float lineX = 0;
// variable that controls the speed
float speed = 2.3f;
// variable that controls the direction
// (either 1 or -1)
int direction = 1;


void setup(){
  size(300,300);
}

void draw(){
  
  background(204);
  
   // if the x position of the line exceeds the right border of the window
   // OR (||) the x position of the line exceeds the left border 
   // of the window:
  if(lineX > width || lineX < 0){
    direction = direction * -1; // change the direction 
  }
  
  // here the new x-position is calculated by adding the speed and direction onto the 
  // current x-position. if direction is -1, lineX decreases. if direction is 1, lineX 
  // increases:
  lineX = lineX + (speed * direction);
  
  // draw the line based on the calculated x-position:
  line(lineX,0,lineX,height);
}



Exercise II: Solution

/* A FRIGHTENED SQUARE
 * 
 * A little sketch to illustrate the random() function
 * and a more complex boolean equation to check whether
 * the mouse pointer is inside a rectangular shape.
 *
 * Frederic Gmeiner 2011
 */

// the x an y positions of the square:
float xPos = 200f;
float yPos = 200f;
// the width and height of the square:
int s = 20;

void setup(){
   size(400,400);
}

void draw(){
  background(204);
  
  // Here we check if the position of the mouse is somewhere inside of the
  // square. To know this, all these four contitions must be true ( && ):
  if( mouseX > xPos && mouseX < xPos + s && mouseY > yPos && mouseY < yPos + s){
      xPos += random(-2,3); // add a random value between -2 and 3 to the xPos
      yPos += random(-2,3);
      fill(40);
  }else{
    fill(255);
  }
  
  // finally draw the square: 
  rect(xPos, yPos, s, s);

}




V for() loops

/* DYNAMIC DISTRIBUTION
 * 
 * This sketch demonstrates the usage of
 * a for-loop for calculating and drawing
 * a certain number of ellipses according
 * to the changing mouseX position.
 *
 * Frederic Gmeiner 2011
 */


// the number of circles:
int numCircles = 15;

void setup(){
  size(500,200);
  stroke(255);
  fill(150);
  smooth();
}

void draw(){
  background(255);
  
  // calculate the distance between the circles
  // so that in total it results in the mouseX position:
  float distance = mouseX / (numCircles-1);
  
  // for every circle (numCircles) calculate the xPos
  // and draw it onto the screen:
  for(int i=0; i < numCircles; i++){
    float xPos = i*distance;
    ellipse(xPos,100,10,10); 
  }
}




VI The array: a collection of variables

/* Random points in an array
 * 
 * This demonstrates how to store values in 
 * an array. This is useful when working with
 * many things which share the same parameters.
 * Here we use two arrays to store the coordinates
 * of circles.
 *
 * Frederic Gmeiner 2011
 */

// total number of circles:
int numCircles = 40;

// the radius of the circles 
float rad = 20f;

// initializing two arrays for storing the x and y positions
// of the circles:
float[] xPositions = new float[numCircles];
float[] yPositions = new float[numCircles];


void setup(){
  
  size(500,500);
  smooth();
  noStroke();
  fill(150);
  
  // iterating over the arrays to set each position with 
  // a random value based on the window size:
  for(int i=0; i< numCircles; i++){
    xPositions[i] = random(0,width);
    yPositions[i] = random(0,height);
  }
}


void draw(){

  background(204);
  
  // again iterating over the arrays. but this time we only 
  // get the x and y coordinates to draw the circles:
  for(int i=0; i< numCircles; i++){
    ellipse(xPositions[i], yPositions[i], rad, rad);
  }

}



Exercise III

Modify the example VI so that the size of the circles changes over time using the sine function sin().

Helpful links:
sin() Example
General introduction (Try out the sketch by copy-pasting it into your processing editor)


14.11.2011 Processing sketches

EXERCISE III: SOLUTION

/* PULSING CIRCLES
 * 
 * Mofification of the example above so that
 * the circles will shrink and grow by using
 * a sinewave.
 *
 * Frederic Gmeiner 2011
 */

int numCircles = 40;
float rad = 20f;

// initial angle of 0. this will increase during the
// runtime of the programm and will be used to calculate
// the sine based on this value in order so modify the size of
// circles.
float angle = 0.0f;
// how fast the angle will increase is defined by the speed variable:
float speed = 0.01;

float[] xPositions = new float[numCircles];
float[] yPositions = new float[numCircles];


void setup(){
  size(500,500);
  smooth();
  noStroke();
  fill(150);
  
  for(int i=0; i< numCircles; i++){
    xPositions[i] = random(0,width);
    yPositions[i] = random(0,height);
  }
}


void draw(){

  background(204);
  // add the speed value to the angle:
  angle += speed;
  
  // calculate the diamater by calculating the sine value of the
  // angle and scaling it up by the value of 30. This is necessary since
  // the sin() funtion returns only values between -1 and 1.
  float diameter = sin(angle)*30;

  for(int i=0; i< numCircles; i++){
    // draw the circles:
    ellipse(xPositions[i], yPositions[i], diameter, diameter);
  }
}




VII.a Another sine and cosine example

/* ELLIPTICAL MOTION
 * 
 * A little demonstration of the sine and 
 * cosine relation.
 *
 * Frederic Gmeiner 2011
 */

float speed = 0.1f;  // frequency
float angle = 0.0f; // you might also call it theta


void draw(){
  
  background(200);
  angle += speed;
  
  point(50,50);
  point(50+ (cos(angle)/2*50), 50+ (sin(angle)*50));

}




VII.b Relation of degrees, PI and sine

int degr= 0;

println("0° Degrees:");
println("PI:" + radians(degr) / PI);
println("sine:" + round(sin(radians(degr))) + "\n");

degr= 90;
println("90° Degrees:");
println("PI:" + radians(degr) / PI);
println("sine:" + round(sin(radians(degr))) + "\n");

degr= 180;
println("180° Degrees:");
println("PI:" + radians(degr) / PI);
println("sine:" + round(sin(radians(degr))) + "\n");

degr= 270;
println("270° Degrees:");
println("PI:" + radians(degr) / PI);
println("sine:" + round(sin(radians(degr))) + "\n");

degr= 360;
println("360° Degrees:");
println("PI:" + radians(degr) / PI);
println("sine:" + round(sin(radians(degr))) + "\n");





READING DATA FROM A TEXTFILE

Imports a data table from a textfile with tab seperated values (tsv).
These formats are very common when exporting spreadsheets from Excel or similar software.
Make sure that the file "measurements.tsv" exists in the data folder of this sketch.

Download: Media:PhysicalComp11_reading_tsv.zip




Retrieved from "https://www.uni-weimar.de/kunst-und-gestaltung/wiki/index.php?title=IFD:PhysicalComp2011&oldid=34446"