EHP - 3D Scaning Project
It's a project involved with 3D Scan.
Ideas And Thoughts
Generally,I showed the reason why we need 3D scan and also different manners to achieve 3D scan. I compared with these manners and choose David Laserscanner to be my platform. Compared with others, it is cheap(with free version and the professional version costs 291Euro while some cost almost 40,000Euro but offer the same quality), very fast(compared with photo-based method),high precision(While pointcloud-based technique can only offer a rather rough result ) and it can scan a large range of subjects from very large object to tiny small things if using the motor scanning.In conclusion, David system is almost the best choice.I would build a system to use the stepper motor controlling the laser to realize the 3D scan.
Related Links To That Topic
- David official site
- David wiki page
- Autodesk free multi-angle photo-based model generate software
- Autodesk image-based modeling software
- A photo-based modeling software
- Multi-angle photo-based model generate software
- Online multi-angle photo-based model generate software
- Free pointcloud based model generate software by kinect
- Use kinect to do the 3D scan and print one's own statue
- Another 3D print project using Kinect
How To & My Process
Step 1 Material
Note: For the camera, In most cases, DAVID works in lowlight conditions to get a clear contrasted laser line. So the cam should be able to handle this. High light sensitivity and as little noise as possible is recommended. For the laser line, laser line should be as thin as possible –> focusable; as bright as possible; perfect straight line and a red or green laser if you use a color camera.
Step 2 Software Installation
Download the latest free David Laser Scanner in the David official site. Or open the local installation for David Laser Scanner V3.3. Find the documentation of the David software as well as many useful tips. Note: Limitation of the free David Laser Scanner is that the maximum resolution of the capture can be used by software is up to 640*480 even if the camera can capture with a HD resolution (1920*1200) , while the full license version can use as much as your camera can offer. 329 EUR for the full license and one can achieves super precise result with this reasonable price. David Laser Scanner is windows platform only. Step 3 Control A Stepper Motor With a stepper motor driver, we can let the movement of a stepper motor slower, smoother and quieter than controlling it with Arduino directly.
Find the Arduino code File:TestCode.zip. Note: 9V external power supply is necessary for driving a stepper. The USB power supply is not sufficient since it has a current limit. Do please turn off the power supply, if you want to exchange the connection of the 4 pins of the stepper. Or it may damage your circuit because it may generate an inverse voltage. Micro step can let the stepper slower and also quieter, but it is less accurate compared with a full step. With the easyDriver, you have options of 1/2, 1/4, 1/8 micro step. By default the easyDriver will drive a stepper with 1/8 micro step. And it can be altered by setting the MS1 and MS2 Pin High and Low. The documentation of easyDriver can be found and you can find the datasheet File:EasyDriverA3967 datasheet .pdf.
Step 4 Building the Gears
Use the gears of the Lego parts. The detailed pictures showed below.
The purpose of building up gears is to slow down the movement of laser. One can assemble the right gears to achieve a high gear ratio. The higher the ratio is, the better quality will be, especially when you want to achieve very precise result with a HD camera and the commercial version of David.
Use the yellow belt to connect the stepper motor with the main wheel which drives the gear set and attach the line laser to the wheel which is the “end” of the gear set at the other side. The function of the Lego frame is to fix the stepper motor and stabilize the whole set. Or you can build up with “professional” gears.
The above picture is showing what I achieved with these gears, and I bought the initial material online. Here is the initial material (available in China only) : plastic gears, metal stick, plastic base bar, plastic washer. In the right picture of the “detailed look”, the gear stays at most left side is the last gear of the whole gears chain. Note: Since the material of plastic is quiet elastic, the Lego based scanner is kind of loose and the belt connecting the stepper with the wheel also brings some problem like sliding issues. It would be much better if you can build the “professional” one. However, you need to gain some experience with the mechanical tools and the “professional” gears are not so easy to find, unless you build your own with laser cutter or 3D printer.
Related Links To That Topic
- Easy driver reference
- David scanner Manuel to scan without background
- A hobbyist built up his own 3D scan hardware for David system