Cam De-Construction
I took apart the webcam by removing all of the screws and taking apart all of the pieces that would come off freely. Next I had to use a plier to forcefully break off the rest of the plastic case of the cam until I only had the microchip and cam remaining. After this I used a solder to remove the 6 LED lights from the microchip.
File:Cam deconstruction 1.jpg File:Cam deconstruction 2.jpg File:Cam deconstruction 3.jpg File:Cam deconstruction 4.jpg
Microscope Construction / Cardboard Model
I wanted to create a microscope that could be used similarly to a mouse during a live performance. My first model in cardboard was the most basic sketch of this concept using one screw in the middle to move the camera up and down.
