PhyChip Synthesiser
PhyChip Synthesiser
circadie module
bioscilator modul
Hex Schmitt trigger
In electronics, a Schmitt trigger is a comparator circuit with hysteresis implemented by applying positive feedback to the noninverting input of a comparator or differential amplifier. It is an active circuit which converts an analog input signal to a digital output signal. The circuit is named a "trigger" because the output retains its value until the input changes sufficiently to trigger a change.
Physarum plates
Utilised coated 35 mm petri dishes in a 3 row x 2 column arrangement. Every plate was treated with an aluminium mesh with a resistance of 0.5 Ω-cm. The mesh is separated by the plate walls. In front of each cell a 4 x 3 mm aluminium finger was placed to create the contact areas. Physarum resistance was around 1300-1500 Ω·cm. On top of each plate added a 3 mm agar 2% concentration for placing the physarum.
Petri dish with 6 plates
Distribution of the physarum network early stage
Distribution of the physarum network final stage
