Automation/RaspberryPi

The Raspberry Pi is an inexpensive Linux Computer which you can for example use to play back videos (up to Fill-HD). This page shows you how to set it up:

Making the RapberryPi run a video at startup

Install The Raspbian image (NOOBS is okay for the beginning, but it wastes a bit space on the SDcard for the recovery image which we don't need. here is how to copy the raspbian on the card: source

Connect to the internet (Ethernet + DHCP) and bring the OS up to date:

sudo apt-get update
sudo apt-get upgrade

Test video playback: source

omxplayer /opt/vc/src/hello_pi/hello_video/test.h264

add option -r to change display frame rate and resolution to the one that the movie file has:

omxplayer -r /opt/vc/src/hello_pi/hello_video/test.h264

make a file startup_script.sh (shell script) with the following content:

clear
echo "Startup script running"
echo "some useful information here"
sleep 2
omxplayer -r movie.mp4 --loop

you will have to make this executable with

sudo chmod 775 startup_script.sh

and you can test if it works by running it

./startup_script.sh

Make it log in automatically

source

Edit the inittab file.

sudo nano /etc/inittab

Disable the getty program. Navigate to the following line in inittab

1:2345:respawn:/sbin/getty 115200 tty1

And add a # at the beginning of the line to comment it out

#1:2345:respawn:/sbin/getty 115200 tty1

Add login program to inittab. Add the following line just below the commented line

1:2345:respawn:/bin/login -f pi tty1 </dev/tty1 >/dev/tty1 2>&1

This will run the login program with pi user and without any authentication

Save and Exit.

Make it start the script automatically:

sudo nano .bashrc

and right at the end put:

if [ $(tty) == /dev/tty1 ]; then
  ./startup_script.sh
fi

(that last 'if' makes sure the script is not starting in an x session)

Synchronizing multiple RaspberryPi

maybe you want to have the different Pi different host names, so you don't get confused

sudo raspi-config

install pexpect:

sudo apt-get install python-pexpect

install python bindings for DBUS https://github.com/LEW21/pydbus

sudo apt-get install python3-setuptools
sudo wget https://github.com/LEW21/pydbus/archive/master.zip
sudo unzip master.zip
rm master.zip
cd pydbus-master/
sudo chmod 777 setup.py
sudo ./setup.py build
sudo ./setup.py install

sudo apt-get remove omxplayer
sudo rm -rf /usr/bin/omxplayer /usr/bin/omxplayer.bin /usr/lib/omxplayer
sudo wget -O- http://yokto.net/0/omxplayer/omxplayer-3176db4.tar.bz2 | sudo tar -C / -xjvf -
sudo ln -sf /lib/arm-linux-gnueabihf/libpcre.so.3 /lib/arm-linux-gnueabihf/libpcre.so.1
sudo wget -O /usr/bin/omxplayer-sync https://github.com/turingmachine/omxplayer-sync/raw/master/omxplayer-sync
sudo chmod 0755 /usr/bin/omxplayer-sync
sudo wget https://github.com/turingmachine/omxplayer-sync/raw/master/synctest.mp4

Make a local network, connect them with Ethernet cable (+Hub if more then two) and configure static IPs source

sudo nano /etc/network/interfaces

start on master:

omxplayer-sync -muv synctest.mp4

start on slave:

omxplayer-sync -luv synctest.mp4

(remove v for verbose mode later once everything works)

Notes

other resources

Use multiple RasberryPis to make a video wall (needs one extra server-Pi, plus one Pi per client) Piwall

Backup and copy

let's say /dev/mmcblk0 is your card reader

make a backup of SDCard:

sudo dd if="/dev/mmcblk0" of="Pi.bin"

put backup on card:

sudo dd bs=4M if=Pi.bin of=/dev/mmcblk0

(both these commands take a long time and the terminal seems like frozen, there is no progress feedback)

reboot:

sudo reboot -h

shutdown:

sudo shutdown -h now